Boat Lift Parts: Shop Boat Hoist Parts Near You (2024)

FAQs

How do I know what size boat lift I need? ›

To find the correct boat lift capacity, you need to know your boat's overall weight including dry weight, fuel, gear, water, and any non-factory additions. It's recommended to add a 20% margin of safety to this total weight.

A travel lift or travelift (also called a boat hoist, boat gantry crane, or boat crane) is a specialised type of crane used for lifting boats out of the water and transporting them around docks or marinas.

Adjust the Base, Legs or Cradle

If the base or cradle of your boat lift is skewed, you'll need to adjust the area that's causing the issue. Use a lift jack to keep the lift upright while you work, loosen the screws and move the leg or structure to the desired position.

The most basic parts of the elevator include a cabin, ropes, traction machine, drive unit, counterweight, hoistway, guide rails, cabin buffer, speed governor, safety systems, and many more.

Bunks are probably one of the essential parts of your boat lift.

Outboards and sterndrives should be left in the tilted-down position. This is especially important in colder climates where a lower unit left in the up position may collect rainwater, leading to freeze-damage. When a lift isn't in use, leave it in the up position to minimize corrosion and marine growth.

Technically, yes, you can install a boat lift on your own. ShoreMaster boat docks are a lighter weight than docks of comparable strength and durability made from different materials, which makes installing them easier. However, we have a dealer network across the country, and why do more work than you have to?

Boat hoists and pneumatic boat lifts are two different types of devices used to raise boats from the water. Most hoist systems use winches with chains, cables, or gears to raise the boat, while pneumatic boat lift systems use air pressure to lift boats.

A boat lift, ship lift, or lift lock is a machine for transporting boats between water at two different elevations, and is an alternative to the canal lock.

Why is my boat lift not raising? ›

If your lift does not raise at all, or raises to the point that it contacts the boat, and then stops, it is most likely and airflow issue. First, check to make sure that the valve handles are turned fully to the lift/launch position.

The Boatlift Mat distributes the weight of your lift and boat over a larger area — plus it locks soft, mucky soil in place, preventing your lift from sinking. The BoatLift Mat distributes the weight of your lift and boat over a larger area — plus it locks soft, mucky soil in place, preventing your lift from sinking.

You should raise it up far enough that waves won't hit the bottom of the boat. If you're on a lake where water levels change (like Lake Wisconsin or the Madison Lakes), make sure the boat is high enough that large waves and/or high water levels won't allow it to float away.

The system consists of a platform on which the vessel is moved vertically, hoists powered by synchronous electric motors, bogies to horizontally transfer the vessel, and the piled pier on which the equipment is supported.

If your lift will not lower, with or without the boat, then it is most likely an airflow issue. Double check your valve handle lever(s) to confirm that they are fully in the lift/launch position. Pick up the air hose to make sure that it is not kinked or resting too low below the water's surface.

When the boat lift or dock is in small enough pieces to carry (following a bit of disassembly), you can simply remove them and transport them one piece at a time if you're moving them from water to land. On a smooth beach, you can usually drag the pieces with an ATV or SUV.

The motor rotates the screw, thereby raising or lowering the lift. The electric boat lift mechanism ensures consistent and controlled lifting, effortlessly catering to specific height requirements. Winch system: This traditional approach uses a cable wrapped around a winch to lift the platform.