How does OPT hair removalmachine works?
OPTlaser hair removal machine use the technology ofselective absorption of light. The melanin in the hair follicle will absorb the laser, and the laser will heat the hair follicles.OPT laser can evenly output and reach target area. Never burn spot. Sending “Optimum Pulse Light” through the skin and into the hair follicles, remove all kinds of pigmentsand hairin best degree.
The temperature in the hair follicles increased fast in a short time. Then achieve a permanent hair removal effect. OPT hair removal is short for the optimal pulsed technology.
Compared to normal IPL technology, OPT energy output is always at the same level. At the same time, OPT technology is also In-motion SHR technology. OPT SHR handpiece could sweep fast on the treatment area.
What is OPT hair removal?
OPT hair removal is a technology which use optimal pulse light, a painless hair removal method. OPT is based on traditional IPL hair removal technology and cut or cancels the energy decease of the sub-pulse. It means, the power of each OPT laser pulse is equal while the traditional IPL pulse energy is decreased from the 1st-pulse to the last pulse. So, OPT hair removal is much more effective and painless.
OPT VS IPL
OPT as one of the most popular hair removal technology, it has following advantages over traditional IPL.
OPT laser hair removal is has less pain
IPL hair removal is hot and more painful due to the shots being hot. IPL has 5 to 8 pulse for one flash. The energy of every pulse is different. The IPL pulse energy is diminishing.IPL treatment needs higher first pulse energy because of the sub-pulse energy decrease. Burning may happen because of the unequal pulse influence.
For the OPT, it does not burn or hurt at all. SHR technology has divided the pulse in every flash. One flash one pulse, every flash energy is the same.
OPT laser treatment is faster
OPT SHR machine uses the sweeping super hair removal method, the frequency could up to 10Hz. Basic IPL hair removal needs several seconds for the next shot.
The research proves SHR hair reduction mode is 2 to 3 times faster than the IPL method.
OPT SHR Method needs 4-6 sessions for permanent hair removal; IPL needs 6-12 sessions.
OPT laser machine is more effective
As we referred above, the pulse energy with OPT technology is the same, there is no energy diminishing. There is more energy delivered to the targeted areas. The OPT method has more effective and much faster results.
OPT treatment has no downtime. It is has a wide application.
Working method
SHR (Super Hair Removal): A high repetition rate of short pulses is transferred deep into the skin. It gently heats the skin with low energy but high frequency through melanin and stem cells. In this way, even the finest hair can be treated better and permanently removed.
On the move (In Motion): with the In-motion scanning technique, the laser head is in constant motion, ensuring full coverage of the entire treatment area for optimal results in short time session. Cooling technology neutralizes the heat on the skin’s surface, preventing superficial burns.
ICE SHR: The supercooling of the handpiece (by a sapphire crystal ) ensures painless, safe and fast hair removal treatments.
Why OPT laser hair removal?
OPT, the optimal pulsed technology is painless for hair reduction. The energy output is stable and evenly.
- Optimal pulsed technology
- No recovery time
- Low investment, high profit.
- In-motion speedy hair removal
- Long term results
- Fast treatment time
| Product name | OPT hair removal machine |
| Power | 3500W |
| Energy | 1-26J/cm2 |
| Display | 8.4 TFT true color touch screen |
| Frequency | 1-10HZ |
| Handles | 1 handle or 2 handles |
| Spot size | 15*50mm/ 12*33mm |
| Cooling system | Air cooling + Water cooling + Sapphire cooling |
| Working mode | Normal mode and Super mode |
| Treatment time | 1 – 30 minutes |
| Voltage | 100V-240V, 50Hz/60Hz |
| Packing size | 55cm * 46cm * 48cm |
| Gross weight | 42KG |
Spare parts List
| NO. | SPARE PARTS | Quantity (pcs) |
| 1 | Host | 1 |
| 2 | Handles | 1 |
| 3 | Filters of handpiece use | 5 |
| 4 | Switch | 2 |
| 5 | Handles bracket | 2 |
| 6 | Operator goggle | 1 |
| 8 | Patient goggle | 1 |
| 9 | Power supply line | 1 |
| 10 | Water funnel | 2 |
| 11 | Foot pedal | 1 |
| 12 | Fuse | 3 |
| 13 | “O”type sealing | 8 |
| 14 | Screws | 8 |
Application
Hair removal
OPT directly work on the pigmentation of the follicle of hair. Results in the hair you have to fall out, and permanently remove all unwanted hair.
Acne/skin rejuvenation removal
Special 480nm-1200nmwavelengthselectively destroys pigment cellsand dramatically reduces the visibility of acne scars. Aiming to createmore uniform, even skin tones.
Pigment removal
Strong OPT Laser efficiently removes epidermis and dermis pigment, such as freckles, pigment sourced from cosmetics, sun spots, age spot, chloasma, etc.
Vascular removal
OPT light and heat are achieved by unwanted cells (Lysis) without damaging other cells.The heat of the light minimizes or removes unwanted spots and discolorations, dismissing vascular till invisible.
OPT hair removal procedure
When you decide to start a OPL Laser hair remove, you should be aware of:
Before opt laser treatment
- No waxing, tweezing, threading or depilatory use for 14days.
- Far away fromirritants such as products containing glycolic acid or Retin-A in the area 10 days prior to treatment.
- Accutane bleaching, plucking or waxing hair should be avoid for 1-2 weeks prior to treatment. The melanin-containing hair must be present in the follicle as it is the “target” for the laser.
- If you have had a history of perioral or genital herpes simplex virus, your provider may recommend prophylactic antiviral therapy. Follow the directions for your particular antiviral medication.
- If you have a tan or have a darker skin type, a bleaching regimen may be started 2-4 weeks before treatment.
- Shave the desired treatment area the night before OPT SHR Laser Hair Removal treatment. No deodorant, creams, oils, perfumes, etc. on area prior to treatment. To manage hair growth before your treatment, shave to remove the hair above the skin only. Although it may seem strange to shave right before OPT SHR Laser Hair Removal treatment, it’s an important step in the process: the laser targets hair in the active growing stage and shaving encourages hair to enter this stage.
During the OPT laser treatment
The operator will use a professional machine to treat you, the whole procedure cost around 30 minutes. It is a non-invasive and non-surgical treatment, there is no pain and no downtime. The areas treated with the OPT SHR Laser device may be red following treatment. This will generally fade within 2-3 days.
After OPT laser treatment
- Avoid from sun exposure as much as possible subsequent to treatment.
- Use a high SPF factor sunscreen when exposed to the sun between / and after treatments.
- Cool any areas which remain warm after treatment with cooling aloe vera gels, cold compresses or frozen gel packs.
- Stop sunbed use and self tanning products.
- Do not wax or tweeze treatment site between hair removal treatments. Shave if you need. Avoid extremely hot baths, whirlpools, saunas, or heavily chlorinated swimming pools for 24-48 hours subsequent to treatments. Avoid strong deodorants subsequent to hair reduction treatment of the underarms.
- Avoid too much exercise.
- Understanding there is a hair growth cycle of hair removal, you should add 4 to 6 more treatments to achieve the permanent hair removal.
OPT stands for optimal pulse light, it isan advanced and improved version of Intense Pulse Light (IPL). OPT SHR Laser is a new technology for permanent hair removal which is having a sweeping success.
OPT laser is based on IPL technology, but improved. OPT is the even pulse, the energy for each OPT pulse is the same, while IPL pulse energy is decreased.
OPT has two working models with OPT and SHR,OPT is mainly for hair removal, pigment removal, acne removal and skin rejuvenation, SHR is mainly for fast removal treatment.
Permanent. (In the medical field, 3 years of results). At least 3 to 6 years.
No pain at all. With this technology, even with no heat feeling, enjoy the hair removal treatment with pleasure.
It is more effective than regular light treatment because it can enter the skin more deeply. The OPT gadget emits pulsed high-intensity light. Its purpose is to make the bandwidth smaller and more even, resulting in fewer side effects. It targets the hair and skin pigment at various depths.
This treatment uses a laser to target the hair follicles and destroy them, preventing new hair from growing in their place. This treatment is generally safe and effective, but it can take several sessions to achieve the desired results. Most people needbetween four and six sessionsto achieve their desired results.
OPT is effective atremoving the structurally damaged blood vessels and diminishes the constant facial redness. This effectively treats more extensive areas of the face with less pain and greater speed than the older laser methods.
Yes, it is. Lasers are much smarter and more precise, so they can get rid of unwanted hair for a wider range of skin tones. With recent technological advancements, it’s safe to perform laser hair removal on dark skin.
On the face, laser hair removal isn’t typically permanent but may be long-lasting. Some people report seeing no hair return after10 years or more. Others experience regrowth sooner and rely on annual touchup treatments to keep unwanted hair at bay.
